Developer: Chainfire
Version: 3.57
Requires Android: 2.1 and up (Rooted)
Category: Tools
Size: 1 MB
Price:
Average Rating: 4.6 / 5.0
Mobile ODIN – Full firmware flashing straight from the device itself!
Mobile
ODIN is the on-device firmware flasher of choice. Just throw those
firmware files on your (internal or external) SD card, start Mobile ODIN
and flash away.
Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported!
If
you use the EverRoot option, Mobile ODIN will root the firmware while
you flash it. Checking out that new leaked firmware? No reason to lose
root!
Flashing with Mobile ODIN does not increase your custom kernel flash counter or make the yellow warning triangle appear.
MANUAL
Flashing
with Mobile ODIN is easy. You start by starting the app and the app
will check your system has everything it needs to continue (like root).
It may need to download an additional package, so it is advised you have
Wi-Fi available.
Now you should see the main Mobile ODIN screen.
It will list a set of partitions. Clicking a partition will allow you to
select a file from your SD card to flash to that partition. Do not
worry about selecting the wrong file – Mobile ODIN will not let you.
Separate files (named after the partition) as well as .tar and .tar.md5
files are supported.
From the desktop ODIN you may be used to
"PDA", "PHONE", and "CSC" buttons. All three of these buttons have been
replaced by the "Open file..." button. This button will open the file
you select from the SD card, and find all the partitions it can flash
inside that file. So if you select a .tar file containing kernel and
modem, the Kernel and Modem partitions will be set up to use that .tar
file for flashing.
Now that we have selected what we want to
flash, if you have the Pro version you can proceed to the EverRoot
section. The EverRoot options allows you to root your firmware while it
is being flashed. Never again will you be without root! Select here
which apps you want to inject in the firmware that is being flashed.
Now
that we are all done selecting partitions and configuring EverRoot, we
continue to "Flash firmware". Mobile ODIN will gather all the
information it needs and perform the flash. Before starting, however, it
will check that your battery level is over 50%, and if applicable offer
to verify MD5 checksums on the files you have selected to flash. If all
is well, it will reboot into recovery mode, and flash the firmware you
have selected.
Screenshots:
For more info, visit Mobile ODIN Pro on Google Play.
thank you guys!!
ReplyDelete